|
|
|
|
REPLACEMENT & ADJUSTMENT of the WATER DISTRIBUTION TUBES Adjust lead tube (bottom spout with 90 Elbow), so that the water is dispersed over the evaporator and it doesn't splash water over the ice deflector. The Side spouts are positioned so the ends of the tubes are approximately ¼" away from the surface, along the top edge of the evaporator. When a tube or fitting is broken in the distribution pan, the remaining fitting can be removed from the pan by using an Easy-Out removal tool. Once the broken piece is removed, the replacement tube and fitting may be installed and adjusted. |
|
Howe Corporation 1650 N
Elston Ave, Chicago, IL. 60622 USA. Telephone 1-773-235-0200 Copyright © 2006 Howe Corporation
Rev. 07/03/08
|