REPLACEMENT OF WATER PUMP

Turn off the main power to the flaker, Remove screws holding the stationary sump cover, loosen and remove water tube fitting (Nylon compression fitting), remove the cover from the electrical junction box, disconnect the water pump wires from the terminal strip. Lift the water pump (with cover attached) off the sump. Remove the water tube hose and clamp. Loosen and remove four (4) nuts which hold the pump onto the sump cover, the pump can then be removed from the cover.

Installing the new pump simply reverse the above procedure. Use caution when routing the new cable to insure they are secured to avoid accidental damage.

Howe Corporation
1650 N Elston Ave
Chicago, IL. 60642-1585
U.S.A.
Telephone 1-773-235-0200
Sales Fax 1-773-235-0269
Corporate Fax 1-773-235-1530