ICE DEFLECTOR SCRAPER ADJUSTMENT

REPLACEMENT & ADJUSTMENT OF ICE DEFLECTOR SCRAPER.

The ice deflector scraper is mounted on one of the three bottom ribs using two ¼-20 stainless bolts and nuts. The scraper's primary purpose is to clear any buildup of ice on the ice deflector as the deflector passes by the scraper. When properly positioned, the scraper will be approximately above the deflector blade. When replacing the scraper, it may be necessary to cut the angled edge down to the proper size. This may be cut with either aviation snips or a razor knife.

Howe Corporation 1650 N Elston Ave, Chicago, IL. 60622 USA.  Telephone 1-773-235-0200
Sales Fax 1-773-235-0269  Corporate Fax 1-773-235-1530

Copyright © 2006 Howe Corporation   Rev. 07/03/08